Single Point of Entry:
|
-
Manages sample tubes from entry into the laboratory until disposal
-
Centrifuge process for chemistry, immunoassay and coagulation testing
-
Re-sorts samples for pending test routing or for storage,
when samples have volume remaining
-
Sorts stats to separate locations
-
16 dynamically-configurable rack locations
for unparalleled sorting flexibility
-
Loads instrument-specific racks
|
|
|
|
Centrifugation:
|
-
56-tube capacity delivers throughput up to 300
centrifuged samples per hour
-
Normal spin of 3,000g for five minutes, allowing
identical processes for both coagulation and chemistry samples
-
System automatically weighs each set of samples and
balances the adaptors
-
Selectable speed and time parameters accommodate
a wide range of samples and testing requirements
|
|
|
|
Sample Loading:
|
-
Easy-loading drawer offers convenient and
continuous access to racks for loading samples, while
robotic handlers safely and efficiently process samples
through the AutoMate 800
-
Dedicated priority-load input area enables priority processing
for rapid test turnaround time
-
Processes BD,* Greiner* and SARSTEDT* tubes,
13 x 75 mm to 16 x 100 mm tubes
-
Processes pediatric tubes, using 13 x 75 mm adapters
-
Recognizes most standard bar codes in compliance
with the Clinical and Laboratory Standards Institute
(formerly known as NCCLS)
*BD, BD Hemogard, Microtainer, Greiner and SARSTEDT are registered trademarks of their respective owners.
|
|
|
|
Volume Determination
|
-
Automated measurement of each sample’s volume prior to dispensing into aliquot tube or for storage
-
Automated measurement of plasma or serum volume
ascertains whether all aliquots can be created
|
|
|
|
Decapping
|
-
Designed for maximum efficiency and lab safety,
to minimize exposure to biohazardous aerosols
-
Compatible with rubber stoppers, plastic and screw-style
caps from BD, Greiner and SARSTEDT
-
“Smart” decapping: Caps are selectively removed for closed-tube sampling, based upon analyzer
-
Caps are automatically dispensed into biohazard bag
|
|
|
|
Sample Receipt
|
-
Sample bar-code reader ensures positive patient
sample identification and notifies the Laboratory
Information System (LIS) of sample receipt
-
Automated measurement of sample diameter and height
ensures proper sorting and aliquotting
|
|
|
|
Aliquotting**
|
-
Processes up to 420 total samples per hour, including
140 primary and 280 secondary tubes
-
Creates up to eight aliquots per primary tube
-
Large tip volume allows drawing of the sample and
subsequent multiple transfers to secondary tubes,
improving performance
-
“Intelligent” aliquotting transfers the proper volume for
samples with single or multiple tests and detects clots
-
Computerized prioritization of aliquots ensures most
critical samples are created first, if sample
volume is minimal
-
Detects clots and routes samples for manual processing
** Only for AutoMate 800
(Aliquotting only available for AutoMate 800)
|
|
|
|
Simple to Use
|
-
Intuitive user interface
-
Flags stats from routines
|
|
|
|
Trouble-Free Maintenance
|
-
Online help to aid in routine maintenance
and troubleshooting
-
Storage bin allows user to load 5 mL tips in bulk,
quickly and easily**
-
Load secondary 13 x 75 mm or 13 x 100 mm tubes (defined at installation) in bulk via pull-out drawer**
-
Replace bar-code label
stock for aliquot tubes via easily accessible slide-out
bin; user can define contents of the secondary-tube label**
** Only for AutoMate 800
(Aliquotting only available for AutoMate 800)
|
|
|
|
Sorting to Sample Racks
|
-
"Open" system architecture sorts to generic 50-tube racks
or analyzer racks, accommodating transfers to instruments,
other lab sections or sendout
test requirements
-
800-sample capacity and up to 16 generic racks, which
can be subdivided to create up to 150 sorting locations
|
|
Easy to Install
|
-
Easy installation, requires minimal lab remodeling
-
Allows “dynamic” rack configuration to accommodate
workload changes
-
LIS interface/ASTM analyzer-like interface
-
Accepts multiple tube sizes and styles as well as multiple
bar-code symbologies
|
|
Re-Sorting to Sample
|
-
Allows re-sorting of samples after analysis
for routing to next analyzer or sample storage;
sample routing determined by duration, temperature
or user-defined destination
|
|
